2nd HDD / SSD SATA Ribbon Cable and Caddy Hardware Kit for the HP Envy (17-nxxx) 17-n000, 17t-n000, 17-n100, 17t-n100 and (m7-nxxx) m7-n000, m7-n109dx Envy 17t-rXXX Envy 17t r102nl series laptops. Compare to 813796-001, 813795-001.
IMPORTANT!: not compatible with other generation ENVY 17 and m7 Series laptops. If you are unsure of what laptop series you have, please check the bottom of your laptop or check underneath the battery (remove the battery to see the series model number). The model number should look something like this "17t-nxxx" or "17-nxxx"
This "caddy hardware and cable kit" will enable you to add a 2nd hard drive to your Laptop. Your Envy 17-nxxx or m7-nxxx series laptop comes from the factory with two internal 2.5-inch hard drive bays. All you need to add a 2nd HDD or SSD is the correct caddy hardware and cable kit. This product includes the caddy / bracket, ribbon cable, four drive screws and three mounting screws as shown in the photo below.

- Add a 2nd HDD/SSD to your HP Envy 17-nxxx, 17t-nxxx series laptop
- Works with 2.5" SATA hard drives or SSD
- Everything you need to install a 2nd 2.5" drive, other than the HDD / SSD
- Includes caddy, ribbon cable, four drive screws, three caddy mounting screws
- For 2nd Drive Bay only
- HDD / SSD not included
- Click on this link for Installation Instructions

Note: This caddy hardware and cable kit is for HP Envy 17-nxxx series laptops. If you are unsure of what laptop series you have, please check the bottom of your laptop or check underneath the battery (remove the battery to see the series model number). This is not an HP Original Part. Newmodeus manufactures this part to meet or exceed OEM specifications. Hard drive and SSD not included. (Disque dur SATA cable pour HP Envy, festplatte kabel).

Compatible with the following HP Envy models:
M7-N011DX M1W00UA M1W00UAR M7-N014DX M1W04UA M1W04UAR M7-N101DX M1W07UA M1W07UAR M7-N103DX M1W05UA M1W05UAR M7-N109DX M1W11UA M1W11UAR M1W11UA
17-n105ng M7-n109dx
This product was added to our catalog on Thursday 11 February, 2016.